Home > Install LON-CAPA > Fedora Core 5 Install

Fedora Core 5 Install

Installing LON-CAPA on a minimal Fedora Core 5 Linux System

This document guides you through the process of setting up a new LON-CAPA server running Fedora Core 5 (FC5) with a minimum of packages installed. The computer will be configured solely as a LON-CAPA server and will be expected to have no other services running. Your server is expected to have a reasonably fast connection to the internet.

More information is available at http://install.lon-capa.org/.

Before you begin

Installing Linux is getting easier and easier. You will be required to log in to the machine and execute some routine Unix commands. Familiarity with the Apache web server, mod_perl, perl, and MySQL are not required to install and run LON-CAPA.

Installation Overview

The installation process takes the following steps:

1. Obtain Fedora Core 5 installation CDs
2. Determine Network Settings
3. Install Fedora Core 5
4. Update your system
5. Install LON-CAPA
6. Create a Domain Coordinator
7. Start/Restart services
8. Log in to LON-CAPA

Obtain Fedora Core 5

FC5 ISO files can be obtained from the project's main site, http://fedora.redhat.com/. For the minimal install you will need only the first ISO image (e.g., FC5-i386-disc1.iso CD for x86-compatible 32-bit).

Determine Network Settings

You will need to know the following network settings for your installation. Note:You must have a static IP address to use LON-CAPA. DHCP is not supported.

• ip address
• netmask
• hostname
• gateway
• domain name server(s)

Minimal FC5 Install

Installing Fedora is quite easy if you've installed any of the Red Hat products before. Some documentation is available from http://fedora.redhat.com/projects/anaconda-installer/. Most of the installation screens are self explanatory. There are a few steps that require comment and are dealt with below.

Installation Type

If this is a fresh install choose "Install Fedora Core". If updating from a previous LON-CAPA installation on an earlier Fedora version (e.g., FC3 or FC4) you may prefer to choose the upgrade option, although if you established a separate partition for /home it will be faster to perform an install instead of an upgrade, and use "Create Custom Layout" to set up partitions - making sure to select the "unchanged data" option for the /home partition, in order to preserve your existing LON-CAPA data. A full back-up to tape or some external system is also strongly advised when updating the Fedora distribution in use on an existing LON-CAPA server.

Partitioning your Drive

For a fresh install may want to use the automatic partitioning feature of the installer, however you should review the results and be prepared to modify them. If you want to customize partitioning use "Create Custom Layout". LON-CAPA resource files are stored in the /home directory, so the majority of the disk space should be allocated here. If you have 20 GB of space for FC5, /home should receive at least 10 to 12 gigs. Since MySQL uses the /var filesystem to store its databases you should have at least 4 gigs of space available on /var. Be sure to include adequate swap space. A minimum is 512 Megs, but you should typically have 1 or 2x as much swap space as you do physical RAM.

Network Configuration

LON-CAPA will not work with a machine set up to use a dynamic IP address. When configuring your network card, be sure to unselect the DHCP option and enter in your network information.

Software

Uncheck the "Office and Productivity" software option. Click the "Customize Now" radio button and for a minimal install uncheck all packages except "Base" in the Base System category. If you leave other packages checked in any of the other categories, you'll need additional ISO CDs.

Finish installing your server, reboot it, and log in as root. The first time you log-in, the Setup Agent will be displayed. This should be used to configure the Firewall.

Exit the Setup Agent, and proceed to change the SELinux setting. The default FC5 installation includes SELinux enabled. Until such time as an SELinux security policy has been created for LON-CAPA, SELinux should be disabled. Retrieve the loncapa_selinux_config file from the LON-CAPA install site:

wget http://install.loncapa.org/versions/fedora/5/loncapa_selinux_config

Install the selinux config file

mv /etc/selinux/config /etc/selinux/config.backup
mv loncapa_selinux_config /etc/selinux/config

Update your system

Update your system to the latest versions of the system software using yum. Yum is configured to check encyption keys for the packages it installs, so you need to import the keys before invoking yum.

rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY
rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora
rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-extras
yum update

Reboot your system before continuing with the installation.

Retrieve the FC5_loncapa_yum file from the LON-CAPA install site:

wget http://install.loncapa.org/versions/fedora/5/FC5_loncapa_yum.conf

Install the FC5_loncapa_yum.conf

mv /etc/yum.conf /etc/yum.conf.backup
cp FC5_loncapa_yum.conf /etc/yum.conf
yum update

Installing LON-CAPA

Install prerequisites

Execute:

yum install LONCAPA-prerequisites

This may take a moment due to LON-CAPA's large number of dependencies.

Retrieve and execute LON-CAPA setup program

Retrieve the LON-CAPA setup with the following command:

wget http://install.loncapa.org/versions/fedora/5/FC5_install.tar

Extract the archive with the following command:

tar xf FC5_install.tar

This creates a directory named installation. Change to it and execute the setup script with the following commands:

cd installation
./install.pl

This script will prompt you for the MySQL root password and will download the latest LON-CAPA release.
You can safely ignore the following warnings from gcc 4 when compiling pwauth:
pwauth.c: In function ‘lastlog’:

• pwauth.c:541: warning: incompatible implicit declaration of built-in function ‘strncpy’
• pwauth.c:543: warning: incompatible implicit declaration of built-in function ‘strlen’

Determine LON-CAPA Settings

LON-CAPA requires a number of identifying parameters to be set in order for it to function at all. Below is a list with descriptions.

Host Type (library or access)

The server must be designated a 'library' or an 'access' server. In general you should have a library server for your instructors to create their course content on and run their courses. Students should connect to access servers. If you are doing the first install of LON-CAPA at your site, or if you are playing with it for your own edification you should make your machine a 'library' server.

LON-CAPA domain

Each site or school which installs LON-CAPA needs its own domain. Here at MSU we use 'msu'. You should choose something short but meaningful. Restriction: One word, no hyphens, underscores, or special characters.
Domain names which include a departmental abbreviation are not recommended as although LON-CAPA may start in a single department, other departments frequently join subsequently. For a domain name: 'msu' is a superior choice to 'msuphys' for example.

LON-CAPA host id

Each LON-CAPA server requires a unique internal name. We use names such as "msul1" for the first library server. Restriction: One word, no hyphens, underscores, or special characters.

Domain's Primary Library Server ID

If you are setting up a domain with a single library server, then the domain's primary library server ID will be the LON-CAPA host id of that server (e.g., msul1). Once your domain grows and you need to add more servers, one of the library servers in the domain should be assigned as the domain's primary library server. This will be where domain-wide settings will be stored.

Host administrator email

The amount of email sent to this address is relatively minimal. Messages are sent every time the system starts up, or if the system is in serious trouble. On a laptop, make this root@localhost.

Support email address

If you enter an e-mail address here, then users of the system will be able to click an "Ask Helpdesk" link in the system to display a web form which they will complete to request support from your institution's helpdesk. On form submission the contents will be sent to the e-mail address you specify.

Configuring LON-CAPA

To configure and install LON-CAPA, execute the following commands:

cd /root/loncapa-N.N     (N.N should correspond to a version number like '1.3')
./UPDATE

You will need to enter the LON-CAPA configuration information you determined in the previous section.

Creating a Domain Coordinator

You will need at least one user at your site who has the role of 'domain coordinator'. This user creates accounts for other users and grants them additional privileges. The make_domain_coordinator.pl script invoked below requires that you enter the users password. The password will show in plaintext as you type it. Feel free to use the "passwd username" command to change it later. Replace USERNAME and DOMAIN with an appropriate user name and your domain.

cd /root/loncapa-N.N/loncom/build
perl make_domain_coordinator.pl USERNAME DOMAIN
(WILL PROMPT FOR PASSWORD HERE)

Start/Restart Services

The LON-CAPA network services take a moment to start. Most misconfigurations will be apparent at this step.

/etc/init.d/loncontrol start
/etc/init.d/httpd start

If you receive warnings when starting the httpd about missing perl modules, please make sure you followed the instructions in Installing LON-CAPA Dependencies. If you still have errors, please contact the MSU LON-CAPA support team.

Log in to your LON-CAPA Machine

Point a web browser at your new machine and log in as the domain coordinator. Congratulations!

If things aren't working right

If you've followed the steps above and the server doesn't start or you think there's something wrong, please send a help request to the MSU LON-CAPA support team. If there were errors in installation of the dependency RPMs or errors during the automatic setup, please send us as much information as possible. If some part of this document is unclear please let us know.

Contact Us: lon-capa@lon-capa.org